From 4440a86cfa359b8e40a484a2cd46d33db5455d8a Mon Sep 17 00:00:00 2001 From: Jonas Gunz Date: Mon, 25 May 2020 20:09:04 +0200 Subject: Initial --- support/config.h.dist | 555 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 555 insertions(+) create mode 100644 support/config.h.dist (limited to 'support/config.h.dist') diff --git a/support/config.h.dist b/support/config.h.dist new file mode 100644 index 0000000..4d742c3 --- /dev/null +++ b/support/config.h.dist @@ -0,0 +1,555 @@ +/************************************************************************ + * IRC - Internet Relay Chat, support/config.h + * Copyright (C) 1990 Jarkko Oikarinen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 1, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * ircdwatch configuration options. + */ + +/* how often (in seconds) should we check that ircd runs? */ +#define IRCDWATCH_POLLING_INTERVAL 30 + +/* + * should we check for config file changes and HUP the server + * if a change is detected? + */ +#undef IRCDWATCH_HUP_ON_CONFIG_CHANGE + +/* + * although you may not want to log ircd-messages to syslog you + * may want to log when ircdwatch reloads the config or when + * ircd croaks and ircdwatch has to restart it + */ +#define IRCDWATCH_USE_SYSLOG +#ifdef IRCDWATCH_USE_SYSLOG +# define IRCDWATCH_SYSLOG_IDENT "ircdwatch" +# define IRCDWATCH_SYSLOG_OPTIONS (LOG_PID) +# define IRCDWATCH_SYSLOG_FACILITY LOG_DAEMON +#endif + + +/* + * irc[d] configuration options. + * + * Most of the following defines are related to the server, + * some apply to the client. + * + */ + +/* + * If you don't want the server to keep reading the MOTD file from the disk, + * define CACHED_MOTD. The server will store the MOTD in memory, and only + * read it again from the disk when rehashing if the file has changed. + */ +#define CACHED_MOTD + +/* CHROOTDIR + * + * Define for value added security if you are a rooter. + * + * CPATH, MPATH, LPATH, PPATH, TPATH, QPATH, OPATH, + * FNAME_USERLOG, FNAME_OPERLOG, FNAME_CONNLOG, FNAME_AUTHLOG + * must have RPATH as root directory! Set them in Makefile + * + * You may want to define IRC_UID and IRC_GID + */ +#undef CHROOTDIR + +#if defined(CHROOTDIR) + #define ROOT_PATH "/where/to/change/root/dir" +#endif + +/* ENABLE_SUMMON + * + * The SUMMON command requires the ircd to be run as group tty in order + * to work properly in many cases. If you are on a machine where it + * won't work, or simply don't want local users to be summoned, undefine + * this. + */ +#undef ENABLE_SUMMON /* local summon */ +#undef ENABLE_USERS /* enables local /users (same as who/finger output) */ + +/* SHOW_INVISIBLE_LUSERS + * + * As defined this will show the correct invisible count for anyone who does + * LUSERS on your server. On a large net this doesnt mean much, but on a + * small net it might be an advantage to undefine it. + */ +#define SHOW_INVISIBLE_LUSERS + +/* NO_DEFAULT_INVISIBLE + * + * When defined, your users will not automatically be attributed with user + * mode "i" (i == invisible). Invisibility means people dont showup in + * WHO or NAMES unless they are on the same channel as you. + */ +#undef NO_DEFAULT_INVISIBLE + +/* OPER_KILL + * + * If you dont believe operators should be allowed to use the /KILL command + * or believe it is uncessary for them to use it, then leave OPER_KILL + * undefined. This will not affect other operators or servers issuing KILL + * commands however. OPER_REHASH and OPER_RESTART allow operators to + * issue the REHASH and RESTART commands when connected to your server. + * Left undefined they increase the security of your server from wayward + * operators and accidents. Defining OPER_REMOTE removes the restriction + * that O-lines only become fully effective for people on the 'same network' + * as the server. Undefined, it increases the security of the server by + * placing restrictions on where people can use operator powers from. + * The 'LOCOP_' #defines are for making the respective commands available + * to 'local' operators. Note that the 'OPER_' #defines affect both global + * (big O) and local (little o) operators. Defining 'LOCOP_x' has no effect + * if 'OPER_x' is undefined so you can't give local operators more rights + * than global ones. + */ +#undef OPER_KILL +#define OPER_REHASH +#undef OPER_RESTART +#define OPER_DIE +#undef OPER_REMOTE +#undef LOCOP_REHASH +#undef LOCOP_RESTART +#undef LOCOP_DIE + +/* + * Maximum number of network connections your server will allow. This should + * never exceed max. number of open file descrpitors and wont increase this. + * Should remain LOW as possible. Most sites will usually have under 50 or so + * connections. + * if you have a lot of server connections, it may be worth splitting the load + * over 2 or more servers. + * 1 server = 1 connection, 1 user = 1 connection. + * This should be at *least* 4: 2 listen ports (1 tcp, 1 udp) + * 1 dns port, 1 client + */ +#define MAXCONNECTIONS 50 + +/* MAXIMUM LINKS + * + * This define is useful for leaf nodes and gateways. It keeps you from + * connecting to too many places. It works by keeping you from + * connecting to more than "n" nodes which you have C:blah::blah:6667 + * lines for. + * + * Note that any number of nodes can still connect to you. This only + * limits the number that you actively reach out to connect to. + * + * Leaf nodes are nodes which are on the edge of the tree. If you want + * to have a backup link, then sometimes you end up connected to both + * your primary and backup, routing traffic between them. To prevent + * this, #define MAXIMUM_LINKS 1 and set up both primary and + * secondary with C:blah::blah:6667 lines. THEY SHOULD NOT TRY TO + * CONNECT TO YOU, YOU SHOULD CONNECT TO THEM. + * + * Gateways such as the server which connects Australia to the US can + * do a similar thing. Put the American nodes you want to connect to + * in with C:blah::blah:6667 lines, and the Australian nodes with + * C:blah::blah lines. Have the Americans put you in with C:blah::blah + * lines. Then you will only connect to one of the Americans. + * + * This value is only used if you don't have server classes defined, and + * a server is in class 0 (the default class if none is set). + * + */ +#define MAXIMUM_LINKS 1 + +/* + * A pure non-routing leaf server can undefine HUB for best performance. + * If your server is running as a a HUB Server then define this. + * A HUB Server has many servers connect to it at the same as opposed + * to a leaf which just has 1 server (typically the uplink). + */ +/* #define HUB */ + +#ifdef HUB +/* + * MAXSERVERS is the maximum number of servers that will be linked + * to your server at the same time. This number is not a limit, + * it is used to allocate memory when ircd is started. + */ +# define MAXSERVERS 3 +#else +# define MAXSERVERS 1 +#endif + +/* R_LINES: The conf file now allows the existence of R lines, or + * restrict lines. These allow more freedom in the ability to restrict + * who is to sign on and when. What the R line does is call an outside + * program which returns a reply indicating whether to let the person on. + * Because there is another program involved, Delays and overhead could + * result. It is for this reason that there is a line in config.h to + * decide whether it is something you want or need. -Hoppie + * + * The default is no R_LINES as most people probably don't need it. --Jto + */ +#undef R_LINES + +#ifdef R_LINES +/* Also, even if you have R lines defined, you might not want them to be + checked everywhere, since it could cost lots of time and delay. Therefore, + The following two options are also offered: R_LINES_REHASH rechecks for + R lines after a rehash, and R_LINES_OFTEN, which rechecks it as often + as it does K lines. Note that R_LINES_OFTEN is *very* likely to cause + a resource drain, use at your own risk. R_LINES_REHASH shouldn't be too + bad, assuming the programs are fairly short. */ +#define R_LINES_REHASH +#define R_LINES_OFTEN +#endif + +/* + * NOTE: defining CMDLINE_CONFIG and installing ircd SUID or SGID is a MAJOR + * security problem - they can use the "-f" option to read any files + * that the 'new' access lets them. Note also that defining this is + * a major security hole if your ircd goes down and some other user + * starts up the server with a new conf file that has some extra + * O-lines. So don't use this unless you're debugging. + */ +#undef CMDLINE_CONFIG /* allow conf-file to be specified on command line */ + +/* + * To use m4 as a preprocessor on the ircd.conf file, define M4_PREPROC. + * The server will then call m4 each time it reads the ircd.conf file, + * reading m4 output as the server's ircd.conf file. + */ +#undef M4_PREPROC + +/* + * If you wish to have the server send 'vital' messages about server + * through syslog, define USE_SYSLOG. Only system errors and events critical + * to the server are logged although if this is defined with FNAME_USERLOG, + * syslog() is used instead of the above file. It is not recommended that + * this option is used unless you tell the system administrator beforehand + * and obtain their permission to send messages to the system log files. + */ +#undef USE_SYSLOG + +#ifdef USE_SYSLOG +/* + * If you use syslog above, you may want to turn some (none) of the + * spurious log messages for KILL/SQUIT off. + */ +#undef SYSLOG_KILL /* log all operator kills to syslog */ +#undef SYSLOG_SQUIT /* log all remote squits for all servers to syslog */ +#undef SYSLOG_CONNECT /* log remote connect messages for other all servs */ +#undef SYSLOG_USERS /* send userlog stuff to syslog */ +#undef SYSLOG_OPER /* log all users who successfully become an Op */ +#undef SYSLOG_CONN /* log all uncomplete/rejected connections */ + +/* + * If you want to log to a different facility than DAEMON, change + * this define. + */ +#define LOG_FACILITY LOG_DAEMON +#endif /* USE_SYSLOG */ + +/* + * define this if you want to use crypted passwords for operators in your + * ircd.conf file. See contrib/mkpasswd/README for more details on this. + */ +#undef CRYPT_OPER_PASSWORD + +/* + * If you want to store encrypted passwords in N-lines for server links, + * define this. For a C/N pair in your ircd.conf file, the password + * need not be the same for both, as long as hte opposite end has the + * right password in the opposite line. See INSTALL doc for more details. + */ +#undef CRYPT_LINK_PASSWORD + +/* + * define this if you enable summon and if you want summon to look for the + * least idle tty a user is logged in on. + */ +#undef LEAST_IDLE + +/* + * IDLE_FROM_MSG + * + * Idle-time nullified only from privmsg, if undefined idle-time + * is nullified from everything except ping/pong. + * Added 3.8.1992, kny@cs.hut.fi (nam) + */ +#define IDLE_FROM_MSG + +/* + * use these to setup a Unix domain socket to connect clients/servers to. + */ +#undef UNIXPORT + +/* + * IRC_UID + * + * If you start the server as root but wish to have it run as another user, + * define IRC_UID to that UID. This should only be defined if you are running + * as root and even then perhaps not. + */ +#undef IRC_UID +#undef IRC_GID + +#ifdef notdef +#define IRC_UID 65534 /* eg for what to do to enable this feature */ +#define IRC_GID 65534 +#endif + +/* + * CLIENT_FLOOD + * + * this controls the number of bytes the server will allow a client to + * send to the server without processing before disconnecting the client for + * flooding it. Values greater than 8000 make no difference to the server. + */ +#define CLIENT_FLOOD 1000 + +/* Remote query flood protection. */ +#define CHREPLLEN 8192 + +/* Default server for standard client */ +#define UPHOST "irc" + +/* + * If you wish to run services, define USE_SERVICES. + * This can make the server noticeably bigger and slower. + * services are not fully implemented yet, so don't use it unless you really + * know what you are doing. + */ +#undef USE_SERVICES + +/* + * Define the following to make the delay for nicks random. + * Some people believe a bot can exactly time the delay and don't like it, + * I think this is a useless concern. -krys + */ +#undef RANDOM_NDELAY + +/* + * You've read the BOFH saga and you liked it, then define the following. + * + * The two following will change the nick delay and channel delay features + * making them totally user unfriendly but more efficient. + */ +#undef BETTER_NDELAY +#undef BETTER_CDELAY + +/* + * Defining this will enable the use of compressed server-server links. + * In order to have it work, you must have the zlib version 1.0 or higher. + * The library and the include files must have been found by configure, + * if you have installed the zlib after running configure, run it again. + */ +#undef ZIP_LINKS + +/* + * Defining this will add an artificial 2 seconds delay for accepting + * connections. This is the OLD behaviour of the server. + * + * NOTE: Undefining this leads to a significant increase in CPU usage if + * you reject client which keeps connecting. + */ +#define SLOW_ACCEPT + +/* + * Defining this will make the server check for rapid connections from a single + * host and reject new connections from this host if the limit is reached. + * + * NOTE: Enabling this feature will significantly increase the CPU usage + * for servers carrying several hundred clients and getting many connections. + * + * IMPORTANT: This **MUST** defined if SLOW_ACCEPT is NOT defined + */ +#undef CLONE_CHECK + +/* STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP */ +/* STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP */ +/* STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP */ + +/* You shouldn't change anything below this line, unless absolutely needed. */ + +#ifdef OPER_KILL +/* LOCAL_KILL_ONLY + * + * To be used, OPER_KILL must be defined. + * LOCAL_KILL_ONLY restricts KILLs to clients which are connected to the + * server the Operator is connected to (ie lets them deal with local + * problem users or 'ghost' clients + */ +#define LOCAL_KILL_ONLY +#endif + +/* Default server port, used by client. */ +#define PORTNUM 6667 + +/* Maximum length the queue of pending connections to one port may grow to. */ +#define LISTENQUEUE 128 + +/* define DEBUGMODE to enable debugging mode.*/ +#undef DEBUGMODE + +/* + * Time interval to wait and if no messages have been received, then check for + * PINGFREQUENCY and CONNECTFREQUENCY + */ +#define TIMESEC 60 /* Recommended value: 60 */ + +/* + * If daemon doesn't receive anything from any of its links within + * PINGFREQUENCY seconds, then the server will attempt to check for + * an active link with a PING message. If no reply is received within + * (PINGFREQUENCY * 2) seconds, then the connection will be closed. + */ +#define PINGFREQUENCY 120 /* Recommended value: 120 */ + +/* + * If the connection to to uphost is down, then attempt to reconnect every + * CONNECTFREQUENCY seconds. + */ +#define CONNECTFREQUENCY 600 /* Recommended value: 600 */ + +/* + * Often net breaks for a short time and it's useful to try to + * establishing the same connection again faster than CONNECTFREQUENCY + * would allow. But, to keep trying on bad connection, we require + * that connection has been open for certain minimum time + * (HANGONGOODLINK) and we give the net few seconds to steady + * (HANGONRETRYDELAY). This latter has to be long enough that the + * other end of the connection has time to notice it broke too. + */ +#define HANGONRETRYDELAY 30 /* Recommended value: 30 seconds */ +#define HANGONGOODLINK 900 /* Recommended value: 15 minutes */ + +/* + * Number of seconds to wait for write to complete if stuck. + */ +#define WRITEWAITDELAY 15 /* Recommended value: 15 */ + +/* + * Number of seconds to wait for DNS/authentication to complete. + * Note that iauth's default timeout per module is 30 seconds, so this value + * should be at least 30 * number of modules. Extra time should really be + * given to be safe. + */ +#define ACCEPTTIMEOUT 90 /* Recommended value: 90 */ + +/* + * Max time from the nickname change that still causes KILL + * automaticly to switch for the current nick of that user. (seconds) + */ +#define KILLCHASETIMELIMIT 90 /* Recommended value: 90 */ + +/* + * Max time for the channel history and nick delay to be effective. + * It should be the same value on all servers of a same net, and + * be greater than the split durations usually seen. + * DELAYCHASETIMELIMIT is the default. + */ +#define DELAYCHASETIMELIMIT 1800 /* Recommended value: 1800 */ + +/* + * Max time for !channel history, this *MUST* be fairly long (usually + * much longer than the value above) to ensure shortname unicity. + * It makes very little sense to use a short time limit here. + */ +#define LDELAYCHASETIMELIMIT 5400 /* Recommended value: 5400 */ + +/* + * Max number of channels a user is allowed to join. + */ +#define MAXCHANNELSPERUSER 10 /* Recommended value: 10 */ + +/* + * USE_IAUTH makes ircd use the iauth program for authentication. + * it can always be overriden by using the -s switch + */ +#define USE_IAUTH + +#ifdef ZIP_LINKS +/* + * the compression level used. (Suggested values: 3, 4, 5) + * Above 5 will only give a *very* marginal increase in compression for a + * *very* large increase in CPU usage. + */ +# define ZIP_LEVEL 5 +#endif + +#ifdef CLONE_CHECK +/* + * If CLONE_CHECK has been defined, these control how the checks are performed, + * and how the alarm is triggered. + */ +# define CLONE_MAX 2 +# define CLONE_PERIOD 10 +#endif + +/* + * define NO_IDENT if you don't want to support ident (RFC1413). + * it is a VERY bad idea to do so, since this will make it impossible to + * efficientely track abusers. + * NO_PREFIX should always be undefined. + */ +/* #undef NO_IDENT */ +/* #undef NO_PREFIX */ + +/* ------------------------- END CONFIGURATION SECTION -------------------- */ +#ifndef ENABLE_SUMMON +# undef LEAST_IDLE +#endif + +#define SEQ_NOFILE 128 /* For Dynix (sequent OS) users : + * set to your current kernel impl, + * max number of socket connections; + * ignored on other OS. + */ +/* + * safety margin so we can always have one spare fd, for motd/authd or + * whatever else. -5 allows "safety" margin of 1 and space reserved. + */ +#define MAXCLIENTS (MAXCONNECTIONS-5) + +#if defined(CLIENT_FLOOD) +# if (CLIENT_FLOOD > 8000) || (CLIENT_FLOOD < 512) +error CLIENT_FLOOD needs redefining. +# endif +#else +error CLIENT_FLOOD undefined +#endif + +#if defined(ZIP_LINKS) +# if (ZIP_MINIMUM > ZIP_MAXIMUM) +error ZIP_MINIMUM needs redefining. +# endif +#endif + +#if !defined(SLOW_ACCEPT) && !defined(CLONE_CHECK) +# define CLONE_CHECK +# define CLONE_MAX 2 +# define CLONE_PERIOD 10 +#endif + +/* +** you wouldn't want to compress messages one by one.. would you? +** (it's not implemented anyways) +*/ +#ifdef ZIP_LINKS +# define SENDQ_ALWAYS +#endif + +#if ! USE_POLL +# if (MAXCONNECTIONS > FD_SETSIZE) +error FD_SETSIZE must be bigger than MAXCONNECTIONS +# endif +#endif -- cgit v1.2.3