diff options
Diffstat (limited to 'gl/regex.h')
| -rw-r--r-- | gl/regex.h | 671 |
1 files changed, 671 insertions, 0 deletions
diff --git a/gl/regex.h b/gl/regex.h new file mode 100644 index 00000000..6885ebdf --- /dev/null +++ b/gl/regex.h @@ -0,0 +1,671 @@ +/* Definitions for data structures and routines for the regular + expression library. + Copyright (C) 1985,1989-93,1995-98,2000,2001,2002,2003,2005,2006 + Free Software Foundation, Inc. + This file is part of the GNU C Library. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +#ifndef _REGEX_H +#define _REGEX_H 1 + +#include <sys/types.h> + +/* Allow the use in C++ code. */ +#ifdef __cplusplus +extern "C" { +#endif + +/* Define __USE_GNU_REGEX to declare GNU extensions that violate the + POSIX name space rules. */ +#undef __USE_GNU_REGEX +#if (defined _GNU_SOURCE \ + || (!defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE \ + && !defined _XOPEN_SOURCE)) +# define __USE_GNU_REGEX 1 +#endif + +#ifdef _REGEX_LARGE_OFFSETS + +/* Use types and values that are wide enough to represent signed and + unsigned byte offsets in memory. This currently works only when + the regex code is used outside of the GNU C library; it is not yet + supported within glibc itself, and glibc users should not define + _REGEX_LARGE_OFFSETS. */ + +/* The type of the offset of a byte within a string. + For historical reasons POSIX 1003.1-2004 requires that regoff_t be + at least as wide as off_t. However, many common POSIX platforms set + regoff_t to the more-sensible ssize_t and the Open Group has + signalled its intention to change the requirement to be that + regoff_t be at least as wide as ptrdiff_t and ssize_t; see XBD ERN + 60 (2005-08-25). We don't know of any hosts where ssize_t or + ptrdiff_t is wider than ssize_t, so ssize_t is safe. */ +typedef ssize_t regoff_t; + +/* The type of nonnegative object indexes. Traditionally, GNU regex + uses 'int' for these. Code that uses __re_idx_t should work + regardless of whether the type is signed. */ +typedef size_t __re_idx_t; + +/* The type of object sizes. */ +typedef size_t __re_size_t; + +/* The type of object sizes, in places where the traditional code + uses unsigned long int. */ +typedef size_t __re_long_size_t; + +#else + +/* Use types that are binary-compatible with the traditional GNU regex + implementation, which mishandles strings longer than INT_MAX. */ + +typedef int regoff_t; +typedef int __re_idx_t; +typedef unsigned int __re_size_t; +typedef unsigned long int __re_long_size_t; + +#endif + +/* The following two types have to be signed and unsigned integer type + wide enough to hold a value of a pointer. For most ANSI compilers + ptrdiff_t and size_t should be likely OK. Still size of these two + types is 2 for Microsoft C. Ugh... */ +typedef long int s_reg_t; +typedef unsigned long int active_reg_t; + +/* The following bits are used to determine the regexp syntax we + recognize. The set/not-set meanings are chosen so that Emacs syntax + remains the value 0. The bits are given in alphabetical order, and + the definitions shifted by one from the previous bit; thus, when we + add or remove a bit, only one other definition need change. */ +typedef unsigned long int reg_syntax_t; + +#ifdef __USE_GNU_REGEX + +/* If this bit is not set, then \ inside a bracket expression is literal. + If set, then such a \ quotes the following character. */ +# define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1) + +/* If this bit is not set, then + and ? are operators, and \+ and \? are + literals. + If set, then \+ and \? are operators and + and ? are literals. */ +# define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1) + +/* If this bit is set, then character classes are supported. They are: + [:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:], + [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:]. + If not set, then character classes are not supported. */ +# define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1) + +/* If this bit is set, then ^ and $ are always anchors (outside bracket + expressions, of course). + If this bit is not set, then it depends: + ^ is an anchor if it is at the beginning of a regular + expression or after an open-group or an alternation operator; + $ is an anchor if it is at the end of a regular expression, or + before a close-group or an alternation operator. + + This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because + POSIX draft 11.2 says that * etc. in leading positions is undefined. + We already implemented a previous draft which made those constructs + invalid, though, so we haven't changed the code back. */ +# define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1) + +/* If this bit is set, then special characters are always special + regardless of where they are in the pattern. + If this bit is not set, then special characters are special only in + some contexts; otherwise they are ordinary. Specifically, + * + ? and intervals are only special when not after the beginning, + open-group, or alternation operator. */ +# define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1) + +/* If this bit is set, then *, +, ?, and { cannot be first in an re or + immediately after an alternation or begin-group operator. */ +# define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1) + +/* If this bit is set, then . matches newline. + If not set, then it doesn't. */ +# define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1) + +/* If this bit is set, then . doesn't match NUL. + If not set, then it does. */ +# define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1) + +/* If this bit is set, nonmatching lists [^...] do not match newline. + If not set, they do. */ +# define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1) + +/* If this bit is set, either \{...\} or {...} defines an + interval, depending on RE_NO_BK_BRACES. + If not set, \{, \}, {, and } are literals. */ +# define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1) + +/* If this bit is set, +, ? and | aren't recognized as operators. + If not set, they are. */ +# define RE_LIMITED_OPS (RE_INTERVALS << 1) + +/* If this bit is set, newline is an alternation operator. + If not set, newline is literal. */ +# define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1) + +/* If this bit is set, then `{...}' defines an interval, and \{ and \} + are literals. + If not set, then `\{...\}' defines an interval. */ +# define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1) + +/* If this bit is set, (...) defines a group, and \( and \) are literals. + If not set, \(...\) defines a group, and ( and ) are literals. */ +# define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1) + +/* If this bit is set, then \<digit> matches <digit>. + If not set, then \<digit> is a back-reference. */ +# define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1) + +/* If this bit is set, then | is an alternation operator, and \| is literal. + If not set, then \| is an alternation operator, and | is literal. */ +# define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1) + +/* If this bit is set, then an ending range point collating higher + than the starting range point, as in [z-a], is invalid. + If not set, then when ending range point collates higher than the + starting range point, the range is ignored. */ +# define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1) + +/* If this bit is set, then an unmatched ) is ordinary. + If not set, then an unmatched ) is invalid. */ +# define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1) + +/* If this bit is set, succeed as soon as we match the whole pattern, + without further backtracking. */ +# define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1) + +/* If this bit is set, do not process the GNU regex operators. + If not set, then the GNU regex operators are recognized. */ +# define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1) + +/* If this bit is set, turn on internal regex debugging. + If not set, and debugging was on, turn it off. + This only works if regex.c is compiled -DDEBUG. + We define this bit always, so that all that's needed to turn on + debugging is to recompile regex.c; the calling code can always have + this bit set, and it won't affect anything in the normal case. */ +# define RE_DEBUG (RE_NO_GNU_OPS << 1) + +/* If this bit is set, a syntactically invalid interval is treated as + a string of ordinary characters. For example, the ERE 'a{1' is + treated as 'a\{1'. */ +# define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1) + +/* If this bit is set, then ignore case when matching. + If not set, then case is significant. */ +# define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1) + +/* This bit is used internally like RE_CONTEXT_INDEP_ANCHORS but only + for ^, because it is difficult to scan the regex backwards to find + whether ^ should be special. */ +# define RE_CARET_ANCHORS_HERE (RE_ICASE << 1) + +/* If this bit is set, then \{ cannot be first in an bre or + immediately after an alternation or begin-group operator. */ +# define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1) + +/* If this bit is set, then no_sub will be set to 1 during + re_compile_pattern. */ +# define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1) + +#endif /* defined __USE_GNU_REGEX */ + +/* This global variable defines the particular regexp syntax to use (for + some interfaces). When a regexp is compiled, the syntax used is + stored in the pattern buffer, so changing this does not affect + already-compiled regexps. */ +extern reg_syntax_t re_syntax_options; + +#ifdef __USE_GNU_REGEX +/* Define combinations of the above bits for the standard possibilities. + (The [[[ comments delimit what gets put into the Texinfo file, so + don't delete them!) */ +/* [[[begin syntaxes]]] */ +# define RE_SYNTAX_EMACS 0 + +# define RE_SYNTAX_AWK \ + (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \ + | RE_NO_BK_PARENS | RE_NO_BK_REFS \ + | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \ + | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \ + | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS) + +# define RE_SYNTAX_GNU_AWK \ + ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \ + & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS \ + | RE_CONTEXT_INVALID_OPS )) + +# define RE_SYNTAX_POSIX_AWK \ + (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \ + | RE_INTERVALS | RE_NO_GNU_OPS) + +# define RE_SYNTAX_GREP \ + (RE_BK_PLUS_QM | RE_CHAR_CLASSES \ + | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \ + | RE_NEWLINE_ALT) + +# define RE_SYNTAX_EGREP \ + (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \ + | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \ + | RE_NEWLINE_ALT | RE_NO_BK_PARENS \ + | RE_NO_BK_VBAR) + +# define RE_SYNTAX_POSIX_EGREP \ + (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES \ + | RE_INVALID_INTERVAL_ORD) + +/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */ +# define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC + +# define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC + +/* Syntax bits common to both basic and extended POSIX regex syntax. */ +# define _RE_SYNTAX_POSIX_COMMON \ + (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \ + | RE_INTERVALS | RE_NO_EMPTY_RANGES) + +# define RE_SYNTAX_POSIX_BASIC \ + (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM | RE_CONTEXT_INVALID_DUP) + +/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes + RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this + isn't minimal, since other operators, such as \`, aren't disabled. */ +# define RE_SYNTAX_POSIX_MINIMAL_BASIC \ + (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS) + +# define RE_SYNTAX_POSIX_EXTENDED \ + (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ + | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \ + | RE_NO_BK_PARENS | RE_NO_BK_VBAR \ + | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD) + +/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is + removed and RE_NO_BK_REFS is added. */ +# define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \ + (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ + | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \ + | RE_NO_BK_PARENS | RE_NO_BK_REFS \ + | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD) +/* [[[end syntaxes]]] */ + +#endif /* defined __USE_GNU_REGEX */ + +#ifdef __USE_GNU_REGEX + +/* Maximum number of duplicates an interval can allow. POSIX-conforming + systems might define this in <limits.h>, but we want our + value, so remove any previous define. */ +# ifdef RE_DUP_MAX +# undef RE_DUP_MAX +# endif + +/* RE_DUP_MAX is 2**15 - 1 because an earlier implementation stored + the counter as a 2-byte signed integer. This is no longer true, so + RE_DUP_MAX could be increased to (INT_MAX / 10 - 1), or to + ((SIZE_MAX - 2) / 10 - 1) if _REGEX_LARGE_OFFSETS is defined. + However, there would be a huge performance problem if someone + actually used a pattern like a\{214748363\}, so RE_DUP_MAX retains + its historical value. */ +# define RE_DUP_MAX (0x7fff) + +#endif /* defined __USE_GNU_REGEX */ + + +/* POSIX `cflags' bits (i.e., information for `regcomp'). */ + +/* If this bit is set, then use extended regular expression syntax. + If not set, then use basic regular expression syntax. */ +#define REG_EXTENDED 1 + +/* If this bit is set, then ignore case when matching. + If not set, then case is significant. */ +#define REG_ICASE (1 << 1) + +/* If this bit is set, then anchors do not match at newline + characters in the string. + If not set, then anchors do match at newlines. */ +#define REG_NEWLINE (1 << 2) + +/* If this bit is set, then report only success or fail in regexec. + If not set, then returns differ between not matching and errors. */ +#define REG_NOSUB (1 << 3) + + +/* POSIX `eflags' bits (i.e., information for regexec). */ + +/* If this bit is set, then the beginning-of-line operator doesn't match + the beginning of the string (presumably because it's not the + beginning of a line). + If not set, then the beginning-of-line operator does match the + beginning of the string. */ +#define REG_NOTBOL 1 + +/* Like REG_NOTBOL, except for the end-of-line. */ +#define REG_NOTEOL (1 << 1) + +/* Use PMATCH[0] to delimit the start and end of the search in the + buffer. */ +#define REG_STARTEND (1 << 2) + + +/* If any error codes are removed, changed, or added, update the + `__re_error_msgid' table in regcomp.c. */ + +typedef enum +{ + _REG_ENOSYS = -1, /* This will never happen for this implementation. */ + _REG_NOERROR = 0, /* Success. */ + _REG_NOMATCH, /* Didn't find a match (for regexec). */ + + /* POSIX regcomp return error codes. (In the order listed in the + standard.) */ + _REG_BADPAT, /* Invalid pattern. */ + _REG_ECOLLATE, /* Invalid collating element. */ + _REG_ECTYPE, /* Invalid character class name. */ + _REG_EESCAPE, /* Trailing backslash. */ + _REG_ESUBREG, /* Invalid back reference. */ + _REG_EBRACK, /* Unmatched left bracket. */ + _REG_EPAREN, /* Parenthesis imbalance. */ + _REG_EBRACE, /* Unmatched \{. */ + _REG_BADBR, /* Invalid contents of \{\}. */ + _REG_ERANGE, /* Invalid range end. */ + _REG_ESPACE, /* Ran out of memory. */ + _REG_BADRPT, /* No preceding re for repetition op. */ + + /* Error codes we've added. */ + _REG_EEND, /* Premature end. */ + _REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */ + _REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */ +} reg_errcode_t; + +#ifdef _XOPEN_SOURCE +# define REG_ENOSYS _REG_ENOSYS +#endif +#define REG_NOERROR _REG_NOERROR +#define REG_NOMATCH _REG_NOMATCH +#define REG_BADPAT _REG_BADPAT +#define REG_ECOLLATE _REG_ECOLLATE +#define REG_ECTYPE _REG_ECTYPE +#define REG_EESCAPE _REG_EESCAPE +#define REG_ESUBREG _REG_ESUBREG +#define REG_EBRACK _REG_EBRACK +#define REG_EPAREN _REG_EPAREN +#define REG_EBRACE _REG_EBRACE +#define REG_BADBR _REG_BADBR +#define REG_ERANGE _REG_ERANGE +#define REG_ESPACE _REG_ESPACE +#define REG_BADRPT _REG_BADRPT +#define REG_EEND _REG_EEND +#define REG_ESIZE _REG_ESIZE +#define REG_ERPAREN _REG_ERPAREN + +/* struct re_pattern_buffer normally uses member names like `buffer' + that POSIX does not allow. In POSIX mode these members have names + with leading `re_' (e.g., `re_buffer'). */ +#ifdef __USE_GNU_REGEX +# define _REG_RE_NAME(id) id +# define _REG_RM_NAME(id) id +#else +# define _REG_RE_NAME(id) re_##id +# define _REG_RM_NAME(id) rm_##id +#endif + +/* The user can specify the type of the re_translate member by + defining the macro RE_TRANSLATE_TYPE, which defaults to unsigned + char *. This pollutes the POSIX name space, so in POSIX mode just + use unsigned char *. */ +#ifdef __USE_GNU_REGEX +# ifndef RE_TRANSLATE_TYPE +# define RE_TRANSLATE_TYPE unsigned char * +# endif +# define REG_TRANSLATE_TYPE RE_TRANSLATE_TYPE +#else +# define REG_TRANSLATE_TYPE unsigned char * +#endif + +/* This data structure represents a compiled pattern. Before calling + the pattern compiler, the fields `buffer', `allocated', `fastmap', + `translate', and `no_sub' can be set. After the pattern has been + compiled, the `re_nsub' field is available. All other fields are + private to the regex routines. */ + +struct re_pattern_buffer +{ + /* Space that holds the compiled pattern. It is declared as + `unsigned char *' because its elements are sometimes used as + array indexes. */ + unsigned char *_REG_RE_NAME (buffer); + + /* Number of bytes to which `buffer' points. */ + __re_long_size_t _REG_RE_NAME (allocated); + + /* Number of bytes actually used in `buffer'. */ + __re_long_size_t _REG_RE_NAME (used); + + /* Syntax setting with which the pattern was compiled. */ + reg_syntax_t _REG_RE_NAME (syntax); + + /* Pointer to a fastmap, if any, otherwise zero. re_search uses the + fastmap, if there is one, to skip over impossible starting points + for matches. */ + char *_REG_RE_NAME (fastmap); + + /* Either a translate table to apply to all characters before + comparing them, or zero for no translation. The translation is + applied to a pattern when it is compiled and to a string when it + is matched. */ + REG_TRANSLATE_TYPE _REG_RE_NAME (translate); + + /* Number of subexpressions found by the compiler. */ + size_t re_nsub; + + /* Zero if this pattern cannot match the empty string, one else. + Well, in truth it's used only in `re_search_2', to see whether or + not we should use the fastmap, so we don't set this absolutely + perfectly; see `re_compile_fastmap' (the `duplicate' case). */ + unsigned int _REG_RE_NAME (can_be_null) : 1; + + /* If REGS_UNALLOCATED, allocate space in the `regs' structure + for `max (RE_NREGS, re_nsub + 1)' groups. + If REGS_REALLOCATE, reallocate space if necessary. + If REGS_FIXED, use what's there. */ +#ifdef __USE_GNU_REGEX +# define REGS_UNALLOCATED 0 +# define REGS_REALLOCATE 1 +# define REGS_FIXED 2 +#endif + unsigned int _REG_RE_NAME (regs_allocated) : 2; + + /* Set to zero when `regex_compile' compiles a pattern; set to one + by `re_compile_fastmap' if it updates the fastmap. */ + unsigned int _REG_RE_NAME (fastmap_accurate) : 1; + + /* If set, `re_match_2' does not return information about + subexpressions. */ + unsigned int _REG_RE_NAME (no_sub) : 1; + + /* If set, a beginning-of-line anchor doesn't match at the beginning + of the string. */ + unsigned int _REG_RE_NAME (not_bol) : 1; + + /* Similarly for an end-of-line anchor. */ + unsigned int _REG_RE_NAME (not_eol) : 1; + + /* If true, an anchor at a newline matches. */ + unsigned int _REG_RE_NAME (newline_anchor) : 1; + +/* [[[end pattern_buffer]]] */ +}; + +typedef struct re_pattern_buffer regex_t; + +/* This is the structure we store register match data in. See + regex.texinfo for a full description of what registers match. */ +struct re_registers +{ + __re_size_t _REG_RM_NAME (num_regs); + regoff_t *_REG_RM_NAME (start); + regoff_t *_REG_RM_NAME (end); +}; + + +/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer, + `re_match_2' returns information about at least this many registers + the first time a `regs' structure is passed. */ +#if !defined RE_NREGS && defined __USE_GNU_REGEX +# define RE_NREGS 30 +#endif + + +/* POSIX specification for registers. Aside from the different names than + `re_registers', POSIX uses an array of structures, instead of a + structure of arrays. */ +typedef struct +{ + regoff_t rm_so; /* Byte offset from string's start to substring's start. */ + regoff_t rm_eo; /* Byte offset from string's start to substring's end. */ +} regmatch_t; + +/* Declarations for routines. */ + +/* Sets the current default syntax to SYNTAX, and return the old syntax. + You can also simply assign to the `re_syntax_options' variable. */ +extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax); + +/* Compile the regular expression PATTERN, with length LENGTH + and syntax given by the global `re_syntax_options', into the buffer + BUFFER. Return NULL if successful, and an error string if not. */ +extern const char *re_compile_pattern (const char *__pattern, size_t __length, + struct re_pattern_buffer *__buffer); + + +/* Compile a fastmap for the compiled pattern in BUFFER; used to + accelerate searches. Return 0 if successful and -2 if was an + internal error. */ +extern int re_compile_fastmap (struct re_pattern_buffer *__buffer); + + +/* Search in the string STRING (with length LENGTH) for the pattern + compiled into BUFFER. Start searching at position START, for RANGE + characters. Return the starting position of the match, -1 for no + match, or -2 for an internal error. Also return register + information in REGS (if REGS and BUFFER->no_sub are nonzero). */ +extern regoff_t re_search (struct re_pattern_buffer *__buffer, + const char *__string, __re_idx_t __length, + __re_idx_t __start, regoff_t __range, + struct re_registers *__regs); + + +/* Like `re_search', but search in the concatenation of STRING1 and + STRING2. Also, stop searching at index START + STOP. */ +extern regoff_t re_search_2 (struct re_pattern_buffer *__buffer, + const char *__string1, __re_idx_t __length1, + const char *__string2, __re_idx_t __length2, + __re_idx_t __start, regoff_t __range, + struct re_registers *__regs, + __re_idx_t __stop); + + +/* Like `re_search', but return how many characters in STRING the regexp + in BUFFER matched, starting at position START. */ +extern regoff_t re_match (struct re_pattern_buffer *__buffer, + const char *__string, __re_idx_t __length, + __re_idx_t __start, struct re_registers *__regs); + + +/* Relates to `re_match' as `re_search_2' relates to `re_search'. */ +extern regoff_t re_match_2 (struct re_pattern_buffer *__buffer, + const char *__string1, __re_idx_t __length1, + const char *__string2, __re_idx_t __length2, + __re_idx_t __start, struct re_registers *__regs, + __re_idx_t __stop); + + +/* Set REGS to hold NUM_REGS registers, storing them in STARTS and + ENDS. Subsequent matches using BUFFER and REGS will use this memory + for recording register information. STARTS and ENDS must be + allocated with malloc, and must each be at least `NUM_REGS * sizeof + (regoff_t)' bytes long. + + If NUM_REGS == 0, then subsequent matches should allocate their own + register data. + + Unless this function is called, the first search or match using + PATTERN_BUFFER will allocate its own register data, without + freeing the old data. */ +extern void re_set_registers (struct re_pattern_buffer *__buffer, + struct re_registers *__regs, + __re_size_t __num_regs, + regoff_t *__starts, regoff_t *__ends); + +#if defined _REGEX_RE_COMP || defined _LIBC +# ifndef _CRAY +/* 4.2 bsd compatibility. */ +extern char *re_comp (const char *); +extern int re_exec (const char *); +# endif +#endif + +/* GCC 2.95 and later have "__restrict"; C99 compilers have + "restrict", and "configure" may have defined "restrict". */ +#ifndef __restrict +# if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__)) +# if defined restrict || 199901L <= __STDC_VERSION__ +# define __restrict restrict +# else +# define __restrict +# endif +# endif +#endif +/* gcc 3.1 and up support the [restrict] syntax. Don't trust + sys/cdefs.h's definition of __restrict_arr, though, as it + mishandles gcc -ansi -pedantic. */ +#undef __restrict_arr +#if ((199901L <= __STDC_VERSION__ \ + || ((3 < __GNUC__ || (3 == __GNUC__ && 1 <= __GNUC_MINOR__)) \ + && !__STRICT_ANSI__)) \ + && !defined __GNUG__) +# define __restrict_arr __restrict +#else +# define __restrict_arr +#endif + +/* POSIX compatibility. */ +extern int regcomp (regex_t *__restrict __preg, + const char *__restrict __pattern, + int __cflags); + +extern int regexec (const regex_t *__restrict __preg, + const char *__restrict __string, size_t __nmatch, + regmatch_t __pmatch[__restrict_arr], + int __eflags); + +extern size_t regerror (int __errcode, const regex_t *__restrict __preg, + char *__restrict __errbuf, size_t __errbuf_size); + +extern void regfree (regex_t *__preg); + + +#ifdef __cplusplus +} +#endif /* C++ */ + +#endif /* regex.h */ |