path: root/doc/INSTALL.txt

  Installing IRC - The Internet Relay Chat Program
  SGML version by Christophe Kalt
  $Id: INSTALL.txt,v 1.38 1999/08/13 17:22:12 kalt Exp $

  This document describes how to install, and configure IRC 2.10.3.

  11..  IInnssttaalllliinngg IIRRCC..

  11..11..  TThhee ccoonnffiigguurree ssccrriipptt

  This package uses a GNU configure script for its configuration.  You
  simply need to untar the distribution and run the ``configure''
  script.  This will run configure which will probe your system for any
  peculiarities it has and setup the Makefile and a file of default
  #define's ($arch/setup.h).

  There are a few options to ``configure'' to help it out, or change the
  default behaviour:

     ----pprreeffiixx==DDIIRR
        changes the default directory into which ircd will install using
        ``make install''.  This defaults to /usr/local

     ----ssbbiinnddiirr==DDIIRR
        changes the default directory where the system admin executable
        files will go. It is important to set this properly. (default is
        prefix/sbin)

     ----llooggddiirr==DDIIRR
        changes the default directory where the irc log files will go.
        (default is prefix/var/log/ircd)

     ----ssyyssccoonnffddiirr==DDIIRR
        changes the default directory where the irc server configuration
        files will go. (default is prefix/etc)

     ----llooccaallssttaatteeddiirr==DDIIRR
        changes the default directory where the irc server state files
        will go. (default is prefix/var/run)

     ----rreessccoonnff==FFIILLEE
        defines the file to be used by ircd to initialize its resolver.
        (default is /etc/resolv.conf)

     ----zzlliibb--iinncclluuddee==DDIIRR
        specifies in which directory the include file from the zlib is
        located.

     ----zzlliibb--lliibbrraarryy==DDIIRR
        specifies in which directory the zlib library is located.

     ----zzlliibb--pprreeffiixx==DDIIRR
        specifies the prefix for zlib location.  It overrides the 2
        previous options.  (The include directory is supposed to be in
        prefix/include, and the library in prefix/lib).

     ----wwiitthh--zzlliibb
        is the default.  ``configure'' looks on your system to find the
        zlib.  If found, ircd will be linked using it.  This does NOT
        mean you can use server link compression, for this you also need
        to define ZIP_LINKS (see section below).

     ----wwiitthhoouutt--zzlliibb
        tells ``configure'' not to look for the zlib.  Defining this
        will keep you from using server link compression.

     ----eennaabbllee--iipp66
        Enable IPv6 support (See notes below)

     ----eennaabbllee--ddssmm
        Enable Dynamically Shared Modules support for iauth


  11..22..  NNootteess ffoorr CCyyggwwiinn3322 uusseerrss

  The daemon of 2.10.3 release compiles properly on W32 systems which
  have the GNU-Win32 environment ( <http://www.cygnus.com/misc/gnu-
  win32/>) setup.  At the time of the release, tests were made using the
  version b20.1 of the Cygwin32 library.

  When compiling on such system, you want to make sure that you have
  carefully followed the Cygwin32 installation notes.  In particular,
  you will need to make sure that the following files exist:
  //bbiinn//ccpp..eexxee, //bbiinn//mmvv..eexxee, //bbiinn//rrmm..eexxee and //bbiinn//sshh..eexxee.

  Also, the IRC server needs a rreessoollvv..ccoonnff file in order to initialize
  the resolver.  This file can be anywhere (see configure options), and
  is typically in //eettcc on UNIX systems.

  Finally, iauth is automatically disabled.  Even though the iauth
  program compiles properly, extra work is required to have a working
  communication channel between the IRC server and the iauth program.


  11..33..  NNootteess ccoonncceerrnniinngg IIPPvv66 ssuuppppoorrtt

  The only part of the software that doesn't use IPv6 is the server
  internal resolver.  It relies on the name servers defined in
  ``/etc/resolv.conf'' to be IPv4 addresses.

  This version was tested on the following IPv6 systems: BSD/OS+KAME,
  Digital Unix, FreeBSD+KAME, Linux, NetBSD+INRIA.

  Because IPv6 numeric addresses contain ``:'' characters, tthhee sseeppaarraattoorr
  ffoorr tthhee sseerrvveerr ccoonnffiigguurraattiioonn ffiillee wwaass cchhaannggeedd ttoo ````%%''''.


  22..  TThhee ccoonnffiigg..hh ffiillee

  The second step consists of defining options before the compilation.
  This is done by editing the ``config.h'' file and changing the various
  #DEFINE's.


  22..11..  DDeeffiinnee wwhhaatt ttyyppee ooff UUNNIIXX yyoouurr mmaacchhiinnee uusseess..

  Pick the machine type which best describes your machine and change the
  #undef to #define (if needed).Some flavours of Unix require no #define
  and in such cases all others should be #undef'd.


  22..22..  DDEEBBUUGGMMOODDEE

  Define DEBUGMODE if you want to see the ircd debugging information as
  the daemon is running. Normally this function will be undefined as
  ircd produces a considerable amount of output.  DEBUGMODE must be
  defined for either of -t or -x command line options to work.  Defining
  this induces a large overhead for the server as it does a large amount
  of self diagnostics whilst running.

  TThhiiss sshhoouulldd oonnllyy bbee ddeeffiinneedd ffoorr tteesstt ppuurrppoosseess,, aanndd nneevveerr uusseedd oonn aa
  pprroodduuccttiioonn sseerrvveerr..
  22..33..  CCPPAATTHH,, MMPPAATTHH,, LLPPAATTHH,, PPPPAATTHH,, TTPPAATTHH,, QQPPAATTHH,, OOPPAATTHH

  Define CPATH to be the directory path to the ``ircd.conf'' file. This
  path is usually /usr/local/lib/ircd/ircd.conf. The format of this file
  will be discussed later.

  The LPATH #define should be set to ``/dev/null'' unless you plan to
  debug the ircd program.  Note that the logfile grows very quickly.

  Define MPATH to be the path to the ``motd'' (message of the day) file
  for the server.  Keep in mind this is automatically displayed whenever
  anyone signs on to your server.

  The PPATH is optional, but if defined, should point to a file which
  either doesn't exist (but is creatable) or a previously used PPATH
  file.  It is used for storing the server's PID so a ps(1) isn't
  necessary.

  Define QPATH to be the directory path to the ``iauth.conf'' file. This
  path is usually /usr/local/lib/ircd/iauth.conf.  The format of this
  file is described by a manual page.

  The OPATH #define should be set to ``/dev/null'' unless you plan to
  debug the iauth program.  Note that the logfile grows very quickly.


  22..44..  CCAACCHHEEDD__MMOOTTDD

  The server sends the ``motd'' to every client connecting.  Every time,
  it reads it from the disk.  This is quite intensive and can be
  undesirable for busy servers.

  Defining CACHED_MOTD will make the server store the ``motd'' in
  memory, and only read it again from the disk when rehashing if the
  file has changed.


  22..55..  CCHHRROOOOTTDDIIRR

  To use the CHROOTDIR feature, make sure it is #define'd and that the
  server is being run as root.  The server will chroot to the directory
  name provded by ``IRCDDIR'' (in Makefile).


  22..66..  EENNAABBLLEE__SSUUMMMMOONN,, EENNAABBLLEE__UUSSEERRSS

  For security conscious server admins, they may wish to leave
  ENABLE_USERS undefined, disabling the USERS command which can be used
  to glean information the same as finger can.  ENABLE_SUMMON toggles
  whether the server will attempt to summon local users to irc by
  writing a message similar to that from talk(1) to a user's tty.


  22..77..  SSHHOOWW__IINNVVIISSIIBBLLEE__LLUUSSEERRSS,, NNOO__DDEEFFAAUULLTT__IINNVVIISSIIBBLLEE

  On large IRC networks, the number of invisible users is likely to be
  large and reporting that number cause no pain.  To aid and effect
  this, SHOW_INVISIBLE_LUSERS is provided to cause the LUSERS command to
  report the number of invisible users to all people and not just
  operators.  The NO_DEFAULT_INVISIBLE define is used to toggle whether
  clients are automatically made invisible when they register.





  22..88..  OOPPEERR__KKIILLLL,, OOPPEERR__RREEHHAASSHH,, OOPPEERR__RREESSTTAARRTT,, LLOOCCAALL__KKIILLLL__OONNLLYY

  The three operator only commands, KILL, REHASH and RESTART, may all be
  disabled to ensure that an operator who does not have the correct
  privilidges does not have the power to cause untoward things to occur.
  To further curb the actions of guest operators, LOCAL_KILL_ONLY can be
  defined to only allow locally connected clients to be KILLed.


  22..99..  ZZIIPP__LLIINNKKSS,, ZZIIPP__LLEEVVEELL

  As of the 2.9.3 version of the server, server-server connections may
  be compressed using the zlib.  In order to compile the server with
  this feature, you MUST have the zlib package (version 1.0 or higher)
  already compiled and define ZIP_LINKS in the config.h file.
  Compression use for server-server connections is separately configured
  in the ircd.conf file for each server-server link.  ZIP_LEVEL allows
  you to control the compression level that will be used.  Values above
  5 will noticeably increase the CPU used by the server.

  The zlib package may be found at
  <http://www.cdrom.com/pub/infozip/zlib/>. The data format used by the
  zlib library is described by RFCs (Request for Comments) 1950 to 1952
  in the files  <ftp://ds.internic.net/rfc/rfc1950.txt> (zlib format),
  rfc1951.txt (deflate format) and rfc1952.txt (gzip format). These
  documents are also available in other formats from
  <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>


  22..1100..  SSLLOOWW__AACCCCEEPPTT

  This option is defined by default and is needed on some OSes.  It
  creates an artificial delay in processing incoming connections.  On a
  given port, no more than 1 connection per 2 seconds will be processed.

  Undefining this will let the server process connections as fast as it
  can which can cause problems on some OSes (such as SunOS) and be
  abused (fast massive join of clonebots..), for these reasons, if you
  decide to undefine SLOW_ACCEPT you MUST define CLONE_CHECK.


  22..1111..  CCLLOONNEE__CCHHEECCKK

  This option acts as a wrapper, by checking incoming connections early
  before starting ident query.  By default, the server will not accept
  more than 2 connections from the same host within 10 seconds.


  22..1122..  OOtthheerr ##ddeeffiinnee''ss

  The rest of the user changable #define's should be pretty much self
  explanatory in the config.h file.  It is *NOT* recommended that any of
  the file undef the line with "STOP STOP" in it be changed.


  33..  EEddiittiinngg tthhee MMaakkeeffiillee,, aanndd ccoommppiilliinngg

  This package now uses GNU autoconf to probe your system and generate
  the correct Makefile.  However you need to edit it to specify specific
  information, such as ``prefix'', ``irc_mode'', ``ircd_mode'' and
  ``ircd_dir''.

  Now to build the package, type ``make all''.  If everything goes will,
  you can then install it by typing ``make install''.


  If you have trouble compiling ircd, copy Makefile.in to Makefile and
  edit Makefile as appropriate.


  44..  TThhee iirrccdd..ccoonnff ffiillee

  After installing the ircd and irc programs, edit the ircd.conf file as
  per the instructions in this section and install it in the location
  you specified in the config.h file.  There is a sample conf file
  called example.conf in the doc/ directory.

  Appendix A (See INSTALL.appendix) describes the differences between IP
  addresses and host names.  If you are unfamiliar with this, you should
  probably scan through it before proceeding.

  The ircd.conf file contains various records that specify configuration
  options.  The record types are as follows:

  1. Machine information     (M)

  2. Administrative info     (A)

  3. Port connections        (P)

  4. Connection Classes      (Y)

  5. Client connections      (I,i)

  6. Operator privileges     (O)

  7. Restrict lines          (R)

  8. Excluded accounts       (K,k)

  9. Server connections      (C,c,N)

  10.
     Deny auto-connections   (D)

  11.
     Hub connections         (H)

  12.
     Leaf connections        (L)

  13.
     Version limitations     (V)

  14.
     Excluded machines       (Q)

  15.
     Service connections     (S)

  16.
     Bounce server           (B)

  17.
     Default local server    (U)

  Except for types ``M'' and ``A'', you are allowed to have multiple
  records of the same type.  In some cases, you can have concurrent
  records.  IItt iiss iimmppoorrttaanntt ttoo nnoottee tthhaatt tthhee llaasstt mmaattcchhiinngg rreeccoorrdd wwiillll
  bbee uusseedd.  This is especially useful when setting up I records (client
  connections).

  44..11..  MMaacchhiinnee iinnffoorrmmaattiioonn


     IInnttrroodduuccttiioonn
        IRC needs to know a few things about your UNIX site, and the
        ``M'' command specifies this information for IRC.  The fomat of
        this command is:

     FFoorrmmaatt

        M:<Server NAME>:<YOUR Internet IP#>:<Geographic Location>:<Port>



     MM  ``M'' specifies a Machine description line

     SSeerrvveerr NNAAMMEE
        The name of YOUR server adding any Internet DOMAINNAME that
        might also be present. If this hostname can be resolved, the IP#
        found will be used to for outgoing connections.  Otherwise the
        default interface address of the host is used.  The server name
        may not be FQDN of another host.  (This means all outgoing
        connections will be done from the same IP#, even if your host
        has several IP#).

     YYOOUURR IInntteerrnneett IIPP##
        If the machine on which you run the server has several IP
        addresses, you can define which IP# to use for outgoing
        connections.  This overrides overrides the ``Server NAME''.

        See Also the ``Port Connections'' section.

     GGeeooggrraapphhiicc LLooccaattiioonn
        Geographic Location is used to say WHERE YOUR SERVER is, and
        gives people in other parts of the world a good idea of where
        you are!  If your server is in the USA, it is usually best to
        say: <CITY> <STATE>, USA.  Like for Denver I say: ``Denver
        Colorado, USA''.  Finnish sites (like tolsun.oulu.fi generally
        say something like ``Oulu, Finland''.

     PPoorrtt
        Defines the port on which your server will listen for UDP pings
        from other servers.  This should be the port were other servers
        are set to autoconnect.  (Also see the port field description in
        connect lines).

     EExxaammppllee::
        M:tolsun.oulu.fi::Oulu, Finland:6667:

        This line reads: My Host's name is ``tolsun.oulu.fi'' and my
        site is located in ``Oulu, Finland''.

        M:orion.cair.du.edu::Denver Colorado, USA:6667:

        This line reads: My Hosts name is ``orion.cair.du.edu'' and my
        site is located in ``Denver Colorado, USA''.



  44..22..  AAddmmiinniissttrraattiivvee iinnffoo


     IInnttrroodduuccttiioonn
        The ``A'' line is used for administrative information about a
        site. The e-mail address of the person running the server should
        be included here in case problems arise.
     FFoorrmmaatt

        A:<Your Name/Location>:<Your Electronic Mailing Addr>:<other>::



     AA  This specifies an Admin record.

     YYoouurr NNaammee && LLooccaattiioonn
        Use this field to say tell your FULL NAME and where in the world
        your machine is.  Be sure to add your City, State/Province and
        Country.

     YYoouurr EElleeccttrroonniixx MMaaiilliinngg AAddddrr
        Use this field to specify your Electronic Mailing Address
        preferably your Internet Mailing Address.  If you have a UUCP or
        ARAPnet address - please add that as well.  Be sure to add any
        extra DOMAIN information that is needed, for example ``mail
        jtrim@orion'' probably won't work as a mail address to me if you
        happen to be in Alaska.  But ``mail jtrim@orion.cair.du.edu''
        would work because you know that ``orion'' is part of the DOMAIN
        ``cair.du.edu''.  So be sure to add your DOMAINNAMES to your
        mailing addresses.

     OOtthheerr
        This is really an OTHER field - you can add what you want here.

     EExxaammppllee
        (the line is just one line in the confuration file, here it is
        cut into two lines to make it clearer to read):

        A:Jeff Trim -  Denver Colorado, USA:INET jtrim@orion.cair.du.edu
        UUCP {hao,isis}!udenva!jtrim:Terve! Heippa!  Have you said hello
        in Finnish today?;)::

        Would look like this when printed out with the /admin command:

        Jeff Trim -  Denver Colorado, USA INET jtrim@orion.cair.du.edu
        UUCP {hao,isis}!udenva!jtrim Terve! Hei! Heippa!  Have you said
        hello in Finnish today? ;)


        Note that the A record cannot be split across multiple lines; it
        will typically be longer than 80 characters and will therefore
        wrap around the screen.


  44..33..  PPoorrtt ccoonnnneeccttiioonnss


     IInnttrroodduuccttiioonn
        The port line adds flexibility to the server's ability to accept
        connections. By use of this line in the ircd.conf file, it is
        easy to setup both Unix Domain ports for the server to accept
        connections on as well as extra internet ports.

     FFoorrmmaatt

        P:<Internet IP#>:<*>:<Internet IP Mask>:<Port>:
        P:<Directory>:<*>:<*>:<Port>:




  +o  Internet Ports

     IInntteerrnneett IIPP##
        If the host on which the server runs has several IP addresses,
        you can define for which IP address connections will be
        accepted. If no is defined here, server will bind to all
        interfaces (INADDR_ANY).  See also MACHINE CONFIGURATION section
        to properly configure outgoing connections.

        P:192.168.1.194:::6664:

     IInntteerrnneett IIPP## MMaasskk
        This defines where connections may come from and be accepted.
        The IP mask uses either *'s or 0's as wildcards. The following
        two lines are the same:


        P:::128.2.*:6664:
        P:::128.2.0.0:6664:



     The incoming isn't matched against the mask, rather the ip# string
     is decoded and compared segment by segment. Thus

     P:::128.2*.1.2:6664:

     will not match 128.20.1.2.

     PPoorrtt
        The port number field tells the server which port number it
        should listen on for incoming connections.

  +o  Unix Socket Ports.

     DDiirreeccttoorryy
        The path set in this field should be the directory name in which
        to create the unix socket for later listening to. The server
        will attempt to create the directory before creating the unix
        socket.

     PPoorrtt
        The port field when used in combination with a pathname in a P-
        line is the filename created in the directory set in the first
        field.

     EExxaammppllee
        P:/tmp/.ircd:::6667:

        Creates a unix socket in the /tmp/.ircd directory called
        ``6667''. The unix socket (file) must be a numerical.


     NNoottee
        You need at least one P line.


  44..44..  CCoonnnneeccttiioonn CCllaasssseess


     IInnttrroodduuccttiioonn
        To enable more efficient use of MAXIMUM_LINKS, connection
        classes were implemented.  All clients belong to a connection
        class.

        Each line for a server should have the same number as the sixth
        field.  If it is absent, the server deaults it to 0, using the
        defaults from the config.h file.
        To define a connection class, you need to include a Y: line in
        the ircd.conf file.  This enables you to define the ping
        frequency, connection frequency (for servers) and maximum number
        of links that class should have.

        Currently, the Y: line MMUUSSTT appear in the ircd.conf file BBEEFFOORREE
        it is used in any other way.

     FFoorrmmaatt

        Y:<Class>:<Ping Frequency>:<Connect freq>:<Max Links>:<SendQ>:<Local Limit>:<Global Limit>



     YY  This specifies a Class record.

     CCllaassss
        This is the class number which gains the following attributes
        and should match that which is on the end of the C/c/N/I/O/S
        line.

     PPiinngg FFrreeqquueennccyy
        This field defines how long the server will let the connection
        remain ``silent'' before sending a PING message to make sure it
        is still alive.  Unless you are sure of what you are doing, use
        the default value which is in your config.h file.

     CCoonnnneecctt FFrreeqquueennccyy
        By changing this number, you change how often your server checks
        to see if it can connect to this server. If you want to check
        very occasionally, use a large value, but if it is an important
        connection, you might want a smaller value so that you connect
        to it as soon as possible.

     MMaaxx LLiinnkkss
        This field defines the maximum number of links this class will
        allow from automatic connections (C lines).  Using /CONNECT
        overrides this feature.  Also defines the maximum number of
        users in this class for I/O lines per I/O line.

     SSeennddQQ
        This field defines the ``SendQ'' value for this class.  If this
        field is not present, the default (from config.h) is assigned.

     LLooccaall lliimmiitt
        This field is used to limit the number of local concurrent
        connections.  The format is <x>.<y>

     +o  x: defines the maximum number of clients from the same host (IP)
        will be allowed.

     +o  y: defines the maximum number of clients from the same user@host
        (IP) will be allowed.  Read note below.

        Only x or y may be set, any unset value defaults to zero.

     GGlloobbaall lliimmiitt
        This field has the same use as the ``Local limit'' field.  But,
        the connection counts are done for all clients present on the
        net instead of only counting local clients.

     NNoottee
        leaving any of the fields (except SendQ) out means their value
        is 0 (ZERO)!!  The SendQ field default value is dynamically
        determined.

     NNoottee
        If you plan to use the local user@host limit, please read the
        following very carefully.  The ``user'' value is the ident reply
        for the connection.  If no reply was given then it defaults to
        ``unknown'' and thus the effective limit will be per host, not
        per user@host. Also, some ident servers return encrypted data
        which changes for every connection making the limit void.

     NNoottee
        Only the local limitation is accurate.

     NNoottee
        If you define a gobal limit, you should also define a local
        limit (same or lower) as it won't take more CPU and will make
        the global limit more accurate.

     NNoottee
        The local and global limits only affect users (I lines), not
        servers nor services.

     EExxaammppllee
        Y:23:120:300:5:100000:0:0: (server class)

        This defines class 23 to allow 5 auto-connections, which are
        checked every 300 seconds.  The connection is allowed to remain
        silent for 120 seconds before a PING is sent.  NOTE: fields 3 &
        4 are in seconds.  The SendQ is set to 100000 bytes.

        Another feature of connection class is the ability to do
        automatic routing by using the class as a ``priority''.  If you
        are connected to a server which has a class lower than one of
        the servers that is ``behind'' it, the server will disconnect
        the lower class one and schedule a ``new'' connection for the
        higher class server.

        Y:1:60:0:50:20000:2:5: (client class)

        In case of a client class, the fields are interpreted a bit
        differently.  This class (number 1) can be used by up to 50
        users.  The connections are allowed to remain silent for 60
        seconds before a PING is set.  The SendQ is set to 20000 bytes.
        A new connection in this class will only be allowed if there
        aren't more than 2 other local connections from the same IP
        address, or more than 5 other connections on the net from the
        same hostname.

        Y:2:60:0:50:20000:2.1:5: (client class)

        In case of a client class, the fields are interpreted a bit
        differently.  This class (number 1) can be used by up to 50
        users.  The connections are allowed to remain silent for 60
        seconds before a PING is set.  The SendQ is set to 20000 bytes.
        A new connection in this class will only be allowed if there
        aren't more than 2 other local connections from the same IP
        address, 1 other local connection from the same user from the
        same IP address, or more than 5 other connections on the net
        from the same hostname.


  44..55..  CClliieenntt ccoonnnneeccttiioonnss

  How to let clients connect to your IRCD.

     IInnttrroodduuccttiioonn
        A client is a program that connects to the ircd daemon (ircd).
        There are clients written in C, GNU Emacs Lisp and many other
        languages.  The ``irc'' program is the C client.  Each person
        that talks via IRC is running their own client.

        The ircd.conf files contains entries that specify which clients
        are allowed to connect to your irc daemon.  Obviously you want
        to allow your own machine's clients to connect.  You may want to
        allow clients from other sites to connect.  These remote clients
        will use your server as a connection point.  All messages sent
        by these clients will pass through your machine.

     FFoorrmmaatt

        I:<TARGET Host Addr>:<Password>:<TARGET Hosts NAME>:<Port>:<Class>
        i:<TARGET Host Addr>:<Password>:<TARGET Hosts NAME>:<Port>:<Class>



     TTAARRGGEETT HHoosstt AAddddrr
        Specifies the IP address(es) of the machine(s) that are allowed
        to connect.  If ``user@'' prefixes the actual IP address the
        server will require that the remote username returned by the
        ident server be the same as the one given before the ``@''.
        Wildcards are permitted unless using a bitmask (e.g.
        1.2.3.0/24).

     PPaasssswwoorrdd
        The password that must be given by the client to be allowed on
        the server.

     TTAARRGGEETT HHoosstt NNAAMMEE
        Specifies the host name(s) of the machines allowed to connect to
        the server.  If ``user@'' prefixes the actual IP address the
        server will require that the remote username returned by the
        ident server be the same as the one given before the ``@''.
        Wildcards are permitted.

        This field can be empty, it then has a special meaning.  See
        Below.

     PPoorrtt
        Specifies the port number for which this configuration line is
        valid.  An empty field, or ``0'' matches all ports.

     CCllaassss
        This field should refer to an existing class.  Connections
        classes are usefull to limit the number of users allowed on the
        server.

     NNoottee
        The server first checks if the client hostname (or any aliases)
        matches the TTAARRGGEETT HHoosstt NNAAMMEE field.  If a match is found, the
        client is accepted.  If not, the server checks if the IP address
        of the client matches the TTAARRGGEETT HHoosstt AAddddrr field.  The matching
        field is used to set the name of the client: for example, if the
        client matches the TTAARRGGEETT HHoosstt AAddddrr field, it will show on IRC
        with a numerical address (even if this address is resolvable).
        If the TTAARRGGEETT HHoosstt NNAAMMEE field is empty, then the host name is
        always used (when available).

     EExxaammpplleess
        For example, if you were installing IRC on tolsun.oulu.fi and
        you wanted to allow examples sake let us assume you were making
        this file for tolsun and you wanted to let your own clients to
        connect to your server, you would add this entry to the file:

        I:x::tolsun.oulu.fi::1
        If you wanted to let remote clients connect, you could add the
        following lines:

        I:x::*.du.edu::1

        Allow any clients from machines whose names end in ``.du.edu''
        to connect with no password.

        I:128.214.6.100::nic.funet.fi::1

        Allow clients from a machine with that IP number to connect.
        Numeric match is enough, name is not required anymore.

        I:x:secret:*.tut.fi::1

        Allow clients from machines matching ``*.tut.fi'' to connect
        with the password ``secret''.

        I:*::*::1

        Allow anyone from anywhere to connect your server.

        This is the easiest way, but it also allows people to for
        example dump files to your server, or connect 1000 (or how many
        open sockets per process your OS allows) clients to your machine
        and take your network ports. Of course the same things can be
        done by simply telnetting to your machine's SMTP port (for
        example).

        I:x::*.fi:6667:1

        Allow clients from machines matching ``*.fi'' to connect on the
        port 6667.

        I:135.11.35.*::*.net::1

        Allows clients from machines which host name matches ``*.net''
        or which IP address matches ``135.11.35.*'' to connect to the
        server.  If the host name does not match ``*.net'' then the IP
        address is used for these clients, even if the host name is
        known.

        I:135.11.35.*::::1

        Allows clients from machines which IP address matches
        ``135.11.35.*'' to connect to the server.  If the host name is
        known, is it used as address for these clients.

     NNEEWW!!!!!!
        As of the 2.7.2d version of the server, the server is able to
        accept connections on multiple ports. I-lines are required for
        each P-line to allow connections to be accepted. For unix
        sockets, this means either adding I:/path/port::/path/port or
        some variation (wildcards are recognised here). For internet
        ports, there must be an I-line which allows the host access as
        normal, but the port field of the I-line must match that of the
        port of the socket accepting the connectiion. A port number of 0
        is a wildcard (matches all ports).

     NNEEWW!!!!!!
        As of the 2.9.1 version of the server, i lines are introduced.
        They work the same way as I lines, but the clients matching an i
        line will have a restricted connection. (no nick/mode change, no
        kick). Such users will have their username prefixed by +, = or -
        depending on the ident reply.

  44..66..  OOppeerraattoorr pprriivviilliiggeess

  How to become the IRC administrator on your site

     IInnttrroodduuccttiioonn
        To become an IRC Administrator, IRC must know who is authorized
        to become an operator and what their ``Nickname'' and
        ``Password'' is.

     FFoorrmmaatt

        O:<TARGET Host NAME>:<Password>:<Nickname>:<Port>:<Class>



     OO  Speficies Operator record. If you use capital letter (``O'') in
        it, it specifies a global operator. Small letter (``o'')
        specifies a local operator. Local operator has basically the
        same rights except global operator with some restrictions.

     TTAARRGGEETT HHoosstt NNAAMMEE
        Tells IRC which host you have the privileges FROM.  This means
        that you should be logged into this host when you ask for the
        priviliges.  If you specify ``tolsun.oulu.fi'' then IRC will
        expect your CLIENT to be connected at ``tolsun.oulu.fi'' - when
        you ask for OPERATOR privileges from ``tolsun.oulu.fi''.  You
        cannot be logged in at any other host and be able to use your
        OPERATOR privileges at tolsun, only when you are connected at
        TOLSUN will this work - this is a safeguard against unauthorized
        sites.

     PPaasssswwoorrdd
        If your AUTHORIZATION Password - this is the password that let's
        IRC know you are who you say you are!  Never tell anyone your
        password and always keep the ``ircd.conf'' file protected from
        all of the other users.

     NNiicckknnaammee
        The Nickname you usually go by - but you can make this what you
        want.

     PPoorrtt
        Unused.

     CCllaassss
        The class field should refer to an existing class (preferably
        having a lower number than that for the relevant I-line) and
        determines the maximum number of simultaneous uses of the O-line
        allowable through the max. links field in the Y-line.

     EExxaammppllee
        O:orion.cair.du.edu:pyunxc:Jeff::1

        There is an OPERATOR at ``orion.cair.du.edu'' that can get
        Operator priviliges if he specifies a password of ``pyunxc'' and
        uses a NICKNAME of ``Jeff''.


  44..77..  RReessttrriicctt ccoonnnneeccttiioonnss

  Let an external program decide if a client should be allowed or not.

     IInnttrroodduuccttiioonn
        R lines provide a convenient way to handle user access to the
        server with an external program.  The outside program given
        three parameters: the client's username (set by the USER
        command), the client's hostname, and the client's ident reply
        (``unknown'' if none).

        It is expected to return a reply line where the first word is
        either ``Y'' or ``N'' meaning `Yes Let them in'' or ``No don't
        let them in''.  If the first word begins with neither ``Y'' or
        ``N'' the default is to let the person on.

     FFoorrmmaatt

        R:<Target Host Name>:<Program>:<User>:::



     RR  This specifies a restrict record.

     TTaarrggeett HHoosstt NNaammee
        In this field you specify the Hostname that the user is
        connecting from.  If you wanted to restrict connects to IRC from
        ``orion.cair.du.edu'' then you would want to enter
        ``orion.cair.du.edu''.

     PPrrooggrraamm
        This is the external program to run to know if the user is
        allowed on your server.

     UUsseerr
        The Username of the user you want removed from IRC.  For example
        ``root''.


  44..88..  EExxcclluuddeedd aaccccoouunnttss

  Remove an errant user from IRC on your site.

     IInnttrroodduuccttiioonn
        Obviously it is hoped that you wouldn't have to use this
        command.  Unfortunately sometimes a user can become unmanageable
        and this is your only recourse - the KILL USER command.  THIS
        COMMAND ONLY AFFECTS YOUR SERVER - If this user can connect to
        another SERVER somewhere else in the IRC-Network then you would
        have to talk to the administrator on that site to disable his
        access from that IRCD Server as well.

     FFoorrmmaatt

        K:<Host Name>:<time interval(s)|comment>:<User>:<port>:



     FFoorrmmaatt

        k:<Host Name>:<time interval(s)|comment>:<Auth>:<port>:



     KK  ``K'' tells the IRCD that you are making a KILL USER command
        entry.

     HHoosstt NNaammee
        In this field you specify the Hostname or the IP address (Single
        IP, Wildcard notation or bitmask notation) that the user is
        connecting from.  If you wanted to REMOVE connects to IRC from
        ``orion.cair.du.edu'' then you would want to enter
        ``orion.cair.du.edu''.  If you want to REMOVE ALL HOSTS access
        you can use ``*'' (Wild Card notation) and no matter what host
        the USERNAME (specified in Field 4) connects from s/he will be
        denied access. Removing all hosts isn't very smart thing to do
        though, why would you run an ircd if you allow nobody to connect
        to it anyways ?

        If you specify an IP address, IP mask, or an IP bitmask, it will
        match clients connecting from the matching addresses, no matter
        if they resolve or not.

        You can prefix an IP address, an IP mask, or IP bitmask by ``=''
        in which case only non resolving matching hosts will be banned.

     ttiimmee iinntteerrvvaall((ss))||ccoommmmeenntt
        Either leave this field empty or put a comment, then the line
        active continuously for the specified user/host machine.  You
        may also specify intervals during the line should be active, see
        examples below.

     UUsseerr
        The USERNAME of the user you want removed from IRC.  For example
        ``root''.

     AAuutthh
        If the user's ident server replies with the OTHER type (as
        opposed to the UNIX type), the reply is not used to set the
        user's username.  (lowercase) k lines can be used in these case
        to reject users based on their ident reply.

        This field will be matched against the ident server reply.  It
        is important to note that OTHER replies are prefixed with a
        ``-'' by the ircd, while UNIX replies are not.

     PPoorrtt
        The port on which the Kill line will be effective. 0 means all
        ports.

     EExxaammpplleess
        K:orion.cair.du.edu::jtrim:0:


        If user ``jtrim'' connects to IRC from host
        ``orion.cair.du.edu'' then IMMEDIATELY REMOVE HIM from my IRCD.

        k:*.stealth.net::-43589:0:

        If a user connects from any host that has the suffix
        ``stealth.net'' and if that host ident server returns ``-43589''
        - then IMMEDIATELY REMOVE THEM from my IRCD.

        K:*.cair.du.edu::root:0:

        If user ``root'' connects to IRC from any host that has the
        suffix ``cair.du.edu'' - then IMMEDIATELY REMOVE THEM from my
        IRCD.

        K:*::vijay:0:

        This line reads ``I don't care WHAT HOST user ``vijay'' is on, I
        will NEVER allow username ``vijay'' to login to my IRCD.''

        K:*.oulu.fi:0800-1200,1400-1900:*:0:

        This disallows all users from hosts with enddomain ``oulu.fi''
        access to your server between 8 and 12am, 2 and 7pm. Users get
        kicked off if they're already signed on when the line becomes
        active (they'll get a warning 5 minutes before).
        K:192.11.35.*::*:0:

        This line disallows all hosts whose IP address matches
        ``192.11.35.*'' to login to the ircd.

        K:=192.11.35.*::*:0:

        This line disallows all hosts whose IP address matches
        ``192.11.35.*'' and which didn't resolve to login to the ircd.


  44..99..  SSeerrvveerr ccoonnnneeccttiioonnss

  How to connect to other servers, How other servers can connect to you

  WWAARRNNIINNGG:: The hostnames used as examples are really only examples and
  not meant to be used (simply because they don't work) in real life.


  Now you must decide WHICH hosts you want to connect to and WHAT ORDER
  you want to connect to them in.  For my example let us assume I am on
  the machine "rieska.oulu.fi" and I want to connect to irc daemons on 3
  other machines:

  +o  ``garfield.mit.edu''        - Tertiary Connection

  +o  ``irc.nada.kth.se''         - Secondary Connection

  +o  ``nic.funet.fi''            - Primary Connection


  And I prefer to connect to them in that order, meaning I first want to
  try connecting to ``nic.funet.fi'', then to ``irc.nada.kth.edu'', and
  finally to ``garfield.mit.edu''.  So if ``nic.funet.fi'' is down or
  unreachable, the program will try to connect to ``irc.nada.kth.se''.
  If irc.nada.kth.se is down it will try to connect to garfield and so
  forth.

  PLEASE limit the number of hosts you will attempt to connect to down
  to 3. This is because of two main reasons:

  1. to save your server from causing extra load and delays to users

  2. to save internet from extra network traffic (remember the old rwho
     program with traffic problems when the number of machines
     increased).


     FFoorrmmaatt

        C:<TARGET Host Addr>:<Password>:<TARGET Host NAME>:<TARGET PORT>:<Class>



     for example:

     C:nic.funet.fi:passwd:nic.funet.fi:6667:1

     - or -

     C:128.214.6.100:passwd:nic.funet.fi:6667:1

     - or -

     C:root@nic.funet.fi:passwd:nic.funet.fi:6667:1

     Each field is separated with a ":" charcter:

     CC  This field tells the IRC program which option is being
        configured. "C" corresponds to a server Connect option.

     TTAARRGGEETT HHoosstt AAddddrr
        Specifies the host name or IP address of the machine to connect
        to.  If ``user@'' prefixes the actual hostname or IP address the
        server will require that the remote username returned by the
        ident server be the same as the one given before the ``@''.

     PPaasssswwoorrdd
        The password of the other host.  A password must always be
        present for the line to be recognized.

     TTAARRGGEETT HHoosstt NNAAMMEE
        The full hostname of the target machine. This is the name that
        the TARGET server will identify itself with when you connect to
        it.  If you were connecting to nic.funet.fi you would receive
        ``nic.funet.fi'' and that is what you should place in this
        field.

     TTAARRGGEETT PPOORRTT
        The INTERNET Port that you want to connect to on the TARGET
        machine. Most of the time this will be set to ``6667''.  If this
        field is left blank, then no connections will be attempted to
        the TARGET host, and your host will accept connections FROM the
        TARGET host instead.  The port field can contain 2 ports,
        separated by a . In this case, the first port is used when auto-
        connecting, the second port is used for the UDP pings to the
        targer server.

     CCllaassss
        The class field should refer to an existing class and determines
        the maximum number of simultaneous uses of the C-line allowable
        through the max. links field in the Y-line.

     NNEEWW!!!!!!
        As of the 2.9.3 version of the server, server connections can be
        compressed with the zlib library.  To define a compressed
        connection, you must have compiled the server with ZIP_LINKS
        defined (cf 2.h), and use a _lowercase_ C line.

  Some examples:

  +o  C:nic.funet.fi::nic.funet.fi:6667:1

     This reads: Connect to host ``nic.funet.fi'', with no password and
     expect this server to identify itself to you as ``nic.funet.fi''.
     Your machine will connect to this host to port 6667.

  +o  C:18.72.0.252:Jeff:garfield.mit.edu:6667:1

     This reads: Connect to a host at address ``18.72.0.252'', using a
     password of ``Jeff''.  The TARGET server should identify itself as
     ``garfield.mit.edu''.  You will connect to Internet Port 6667 on
     this host.

  +o  C:irc.nada.kth.se::irc.nada.kth.se:1

     This reads: do not attempt to connect to ``irc.nada.kth.se'', if
     ``irc.nada.kth.se'' requests a connection, allow it to connect.

  Now back to our original problem, we wanted OUR server CONNECT to 3
  hosts,  ``nic.funet.fi'', ``irc.nada.kth.se'' and ``garfield.mit.edu''
  in that order.  So as we enter these entries into the file they must
  be done in rreevveerrssee order of how we could want to connect to them.

  Here's how it would look if we connected ``nic.funet.fi'' first:

  C:garfield.mit.edu::garfield.mit.edu:6667:1
  C:irc.nada.kth.se::irc.nada.kth.se:6667:1
  C:nic.funet.fi::nic.funet.fi:6667:1

  Ircd will attempt to connect to nic.funet.fi first, then to irc.nada
  and finally to garfield.

  RReecciipprrooccaall eennttrriieess:: Each ``C'' entry requires a corresponding ``N''
  entry that specifies connection priviliges to other hosts.  The ``N''
  entry contains the password, if any, that you require other hosts to
  have before they can connect to you.  These entries are of the same
  format as the ``C'' entries.



     FFoorrmmaatt
        The format for the NOCONNECT entry in the ``ircd.conf'' is:

        N:<TARGET Host Addr>:<Password>:<TARGET Host NAME>:<Domain Mask>:<Class>



     Let us assume that ``garfield.mit.edu'' connects to your server and
     you want to place password authorization authorization on garfield.
     The ``N'' entry would be:

     N:garfield.mit.edu:golden:garfield.mit.edu::

     This line says: expect a connection from host ``garfield.mit.edu'',
     and expect a login password of ``golden'', and expect the host to
     identify itself as ``garfield.mit.edu''.

     N:18.72.0.252::garfield.mit.edu::

     This line says: expect a Connection from host ``18.72.0.252'', and
     don't expect login password.  The connecting host should identify
     itself as ``garfield.mit.edu''.

     NN  ``N'' corresponds to a server Noconnect option.

     TTAARRGGEETT HHoosstt AAddddrr
        Specifies the host name or IP address of the machine to connect
        to.  If ``user@'' prefixes the actual hostname or IP address the
        server will require that the remote username returned by the
        ident server be the same as the one given before the ``@''.

     PPaasssswwoorrdd
        The password of the other host.  A password must always be
        present for the line to be recognized. If CRYPT_LINK_PASSWORD is
        defined in config.h, this password must be crypted.

     TTAARRGGEETT HHoosstt NNAAMMEE
        The full hostname of the target machine. This is the name that
        the TARGET server will identify itself with when you connect to
        it.  If you were connecting to nic.funet.fi you would receive
        ``nic.funet.fi'' and that is what you should place in this
        field.

     DDoommaaiinn MMaasskk
        Domain masking, see below.


     CCllaassss
        The class field should refer to an existing class.

     WWiillddccaarrddss ddoommaaiinnss
        To reduce the great amount of servers in IRCnet wildcard DOMAINS
        were introduced in 2.6. To explain the usage of wildcard domains
        we take an example of such:

        *.de  - a domain name matching all machines in Germany.

        Wildcard domains are useful in that ALL SERVERS in Germany (or
        any other domain area) can be shown as one to the rest of the
        world. Imagine 100 servers in Germany, it would be incredible
        waste of netwotk bandwidth to broadcast all of them to all
        servers around the world.

        So wildcard domains are a great help, but how to use them ?

        They can be defined in the N-line for a given connection, in
        place of ``Domain Mask'' you write a magic number called
        wildcard count.

        Wildcard count tells you HOW MANY PARTS of your server's name
        should be replaced by a wildcard. For example, your server's
        name is ``tolsun.oulu.fi'' and you want to represent it as
        ``*.oulu.fi'' to ``nic.funet.fi''. In this case the wildcard
        count is 1, because only one word (tolsun) is replaced by a
        wildcard.

        If the wildcard count would be 2, then the wildcard domain would
        be ``*.fi''. Note that with wildcard name ``*.fi'' you could NOT
        connect to ``nic.funet.fi'' because that would result in a
        server name ccoolllliissiioonn (*.fi matches nic.funet.fi).

        I advice you to not to use wildcard servers before you know for
        sure how they are used, they are mostly beneficial for backbones
        of countries and other large areas with common domain.



  44..1100..  DDeennyy aauuttoo--ccoonnnneeccttiioonnss


     IInnttrroodduuccttiioonn
        D lines were implemented to give server administrators more
        control on how auto connections are done.  This will most likely
        only be useful for big networks which have complex
        configurations.

     FFoorrmmaatt

        D:<Denied Server Mask>:Denied Class:<Server Name>:Server Class:



     DDeenniieedd SSeerrvveerr MMaasskk
        This field is matched against all servers currently present on
        the network.

     DDeenniieedd CCllaassss
        If this field contains a class number, it will match if any
        server in that class is currently present on the network.  Note
        that this can be true for any server, even the ones not directly
        connected.


     SSeerrvveerr MMaasskk
        This field is matched against the server name that the server
        wants to auto connect to.

     SSeerrvveerr CCllaassss
        This field is used to match against the class to which belong
        the servers for which an autoconnect is set.

     EExxaammpplleess
        D:*.edu::*.fi::

        Don't auto-connect to any ``*.fi'' server if any server present
        on the network matches ``*.edu''.

        D::2:eff.org:3:

        Do now auto-connect to ``eff.org'', or any server in class ``3''
        if a server defined to be in class ``2'' is currently present on
        the network.


  44..1111..  HHuubb ccoonnnneeccttiioonnss


     IInnttrroodduuccttiioonn
        In direct contrast to L-lines, the server also implements H-
        lines to determine which servers may act as a hub and what they
        may ``hub for''.  If a server is only going to supply its own
        name (ie act as a solitary leaf) then no H-line is required for,
        else a H-line must be added.

     FFoorrmmaatt

        H:<Server Mask>:*:<Server Name>::



     SSeerrvveerr MMaasskk
        All servers that are allowed via this H-line must match the mask
        given in this field.

     SSeerrvveerr NNaammee
        This field is used to match exactly against a server name,
        wildcards being treated as literal characters.

     EExxaammpplleess
        H:*.edu::*.bu.edu::

        Allows a server named ``*.bu.edu'' to introduce only servers
        that match the ``*.edu'' name mask.

        H:*::eff.org::

        Allows ``eff.org'' to introduce (and act as a hub for) any
        server.

     NNoottee
        It is possible to have and use multiple H-lines (or L-lines) for
        the one server.  eg:


        H:*.edu:*:*.bu.edu::
        H:*.au:*:*.bu.edu::



     is allowed as is


     L:*.edu:*:*.au::
     L:*.com:*:*.au::




  44..1122..  LLeeaaff ccoonnnneeccttiioonnss


     IInnttrroodduuccttiioonn
        To stop servers which should only act as leaves from hubs
        becoming hubs accidently, the L line was introduced so that hubs
        can be aware of which servers should and shouldnt be treated as
        leaves. A leaf server is supposed to remain a node for the
        entirity of its life whilst connected to the IRC server network.
        It is quite easy, however for a leaf server to be incorrectly
        setup and create problems by becoming a node of 2 or more
        servers, ending its life as a leaf. The L line enables the
        administrator of an IRC ``Hub server'' to ``stop'' a server
        which is meant to act as a leaf trying to make itself a hub.
        If, for example, the leaf server connects to another server
        which doesnt have an L-line for it, the one which does will drop
        the connection, once again making the server a leaf.

     FFoorrmmaatt

        L:<Server Mask>:*:<Server Name>:<Max Depth>:



     SSeerrvveerr MMaasskk
        Mask of which servers the leaf-like attributes are used on when
        the server receives SERVER messages.  The wildcards * and ? may
        be used within this field for matching purposes.  If this field
        is empty, it acts the same as if it were a single * (ie matches
        everything).

     SSeerrvveerr NNaammee
        The name of the server connected to you that for which you want
        to enforce leaf-like attributes upon.

     MMaaxx DDeepptthh
        Maximum depth allowed on that leaf and if not specified, a value
        of 1 is assumed.  The depth is checked each time a SERVER
        message is received by the server, the hops to the server being
        the field checked against this max depth and if greater, the
        connection to the server that made its leaf too deep has its
        connection dropped.  For the L-line to come into effect, both
        fields, 2 and 4, must match up with the new server being
        introduced and the server which is responsible for introducing
        this new server.


  44..1133..  VVeerrssiioonn lliimmiittaattiioonnss


     IInnttrroodduuccttiioonn
        V-lines are used to restrict server connecting to you based on
        their version and on compile time options.

     FFoorrmmaatt


        V:<Version Mask>:<Flags>:<Server Mask>::



     VVeerrssiioonn MMaasskk
        The matching version number strings will be rejected.

     FFllaaggss
        If any flag specified in this field is found in the peer's flags
        string, it will be rejected.

     SSeerrvveerr MMaasskk
        This field is used to match server names.  The V line will be
        used for servers matching the mask given in this field.

     SSeerrvveerr TTyyppee
        Both the VVeerrssiioonn MMaasskk and the FFllaaggss should be prefixed with the
        server type identification.  This implementation uses the id
        ``IIRRCC'' (starting with version 2.10).

     EExxaammpplleess
        V:IRC/021001*::*::

        Disallows any ``IRC'' server which version is 2.10.1* to
        connect.

        V:IRC/021001*:IRC/D:*::

        Disallows any ``IRC'' server which version is 2.10.1* or which
        has been compiled with DEBUGMODE defined to connect.

        V:*/0209*::::

        Disallows any server using the 2.9 protocol to connect.

     NNoottee
        It is possible to have and use multiple V-lines for the one
        server mask.

        V:IRC/021001*::*::

        V:IRC/021002*::*::

        is allowed.

     PPrroottooccooll VVeerrssiioonn
        Only the 4 first digit of the VVeerrssiioonn NNuummbbeerr are standard: they
        define the protocol version.  The remaining of the string is
        implementation dependant; matches on this part should be used
        with particular identification.

     FFllaaggss
        are not standard.  Therefore, this field sshhoouulldd aallwwaayyss contain a
        specific identification.


  44..1144..  EExxcclluuddeedd mmaacchhiinneess

  Disallowing SERVERS in your irc net.

     IInnttrroodduuccttiioonn
        In some cases people run into difficulties in net
        administration.  For one reason or another you do not want a
        certain server to be in your net (for example because of the
        security holes it opens for every server if it's not secured
        carefully). In that case you should use Q-lines in your server.
        When you specify a server name in Q-line, everytime some server
        link tries to introduce you a server (remember, all server names
        are broadcast around the net), that name is checked if it
        matches the Q-lines in your server. If it matches, then yyoouurr
        sseerrvveerr disconnects the link. Note that just placing Q-lines to
        your server probably results in yyoouurr sseerrvveerr being left alone,
        unless other servers have agreed to have the same Q-line in
        their ircd configuration files as well.

     EExxaammppllee
        Q::of the security holes:foo.bar.baz::

        This command excludes a server named ``foo.bar.baz'', the reason
        is given to be security holes (you should give a reason, it is
        polite). The first field is unused, so leave it empty.


  44..1155..  SSeerrvviiccee ccoonnnneeccttiioonnss


     IInnttrroodduuccttiioonn
        The Service is a special kind of IRC client. It does not have
        the full abilities of a normal user but can behave in a more
        active manner than a normal client.

        Services are not intended for interactive usage, and are better
        suited for automated clients.

     FFoorrmmaatt

        S:<TARGET Host Mask>:<Password>:<Service Name>:<Service Type>:<Class>



     TTAARRGGEETT HHoosstt MMaasskk
        The host mask should be set to match the host(s) from which the
        service will be connecting from. This may be either an IP# or
        full name (prefered).

     PPaasssswwoorrdd
        This is the password which must be passed in the SERVICE
        command.

     SSeerrvviiccee NNaammee
        The name used by the service. Services don't have nicknames, but
        a static name defined by the S line.

     SSeerrvviiccee TTyyppee
        The type of service. It defines the priviledges given to the
        service. Be very careful in the types you allow.  The types can
        be found in include/service.h

     CCllaassss
        The class field should refer to an existing class.

     NNootteess
        A service is not a very useful sort of client, it cannot join
        channels or issue certain commands although most are available
        to it. Services are rejected upon sending an unknown or
        unallowed command. Services however, are not affected by flood
        control and can be granted special privileges. It is therefore
        wwiissee ttoo oovveerrsseeee tthhee uussee ooff SS--lliinneess wwiitthh mmuucchh ccaarree..




  44..1166..  BBoouunnccee sseerrvveerr


     IInnttrroodduuccttiioonn
        This provides you a way to bounce clients to another server.
        This information is provided to clients which are denied
        connection, either because their connection class is full, or
        the server is full, or they are not authorized to connect.

     FFoorrmmaatt

        B:<Class|Host Mask>::<Server Name>:<Port>:



     BB  This specifies a Bounce record.

     CCllaassss||HHoosstt MMaasskk
        This field specifies to which client this configuration line
        applies to.  It can be either a connection class number, a host
        mask to be matched against the client's hostname, or an IP
        address/mask/bitmask to be matched against the client's IP
        address.

        When the server is completely full, it rejects clients with the
        ``All connections in use'' message.  In this case, the server
        doesn't process the connections at all, and has no knowledge of
        the client's host name, or class number.  For these cases, this
        field must be empty.

     SSeerrvveerr NNaammee
        This specifies the IRC server hostname that the client should
        use.

     PPoorrtt
        This specifies the IRC server port that the client should
        connect to.

     EExxaammppllee
        B:2::irc.stealth.net:6660:

        Rejected clients in class 2 are advised to use
        ``irc.stealth.net'' on port 6660.

        B:*.fi::irc.funet.fi:6667:

        Finnish client should use irc.funet.fi when they cannot be taken
        anymore.

        B:::irc2.stealth.net:6667:

        When the server is completely full, clients should use the
        secondary server.


  44..1177..  DDeeffaauulltt llooccaall sseerrvveerr ((ffoorr llooccaall cclliieennttss)) **OOBBSSOOLLEETTEEDD**


     IInnttrroodduuccttiioonn
        This defines the default connection for the irc client.  If you
        are running an ircd server on the same machine, you will want to
        define this command to connect to your own host.  If your site
        is not running a server then this command should contain the
        TARGET host's connection information and password (if any).


     FFoorrmmaatt

        U:<TARGET Host addr>:<Password>:<TARGET Host NAME>:<Internet Port>



     EExxaammpplleess
        U:tolsun.oulu.fi::tolsun.oulu.fi:6667

        U:128.214.5.6::tolsun.oulu.fi:6667

        U:tolsun.oulu.fi::tolsun.oulu.fi

        If the port number is omitted, irc will default to using 6667.


  55..  RReellaatteedd rreessoouurrcceess


     MMaaiilliinngg lliisstt
        A list is dedicated to the people using ircd. If you have
        trouble running ircd, or wish to discuss the future, you can
        subscribe by sending an email to majordomo@irc.org, with
        ``ssuubbssccrriibbee iirrccdd--uusseerrss'' in the body.

        If you just have a question and don't want to subscribe to the
        list, mail to ircd-users@irc.org.  Be sure to indicate which
        version you are using.

     DDeevveellooppmmeenntt
        Technical discussions and development are carried on ircd-
        dev@irc.org.  People interested in very early testing, and/or
        working on the source code are welcome.  This is done by sending
        an email to majordomo@irc.org, with ``ssuubbssccrriibbee iirrccdd--ddeevv'' in
        the body.

     FFAAQQ
        It can be found on the WWW, at
        <http://www.stealth.net/~kalt/irc/faq.html>.

     WWWWWW 22..99
        Vesa Ruokonen has also put serveral pages related to the 2.9
        servers on the WWW:  <http://www.irc.org/~irc/server/>.


  66..  RReeppoorrttiinngg aa bbuugg

  If you encounter a bug in the software, here is how and where to
  report it.


  66..11..  HHooww ttoo rreeppoorrtt aa bbuugg

  To save everyone time, make sure that your e-mail contains all the
  information related to your problem.  In particular, we need to know:

     PPaacckkaaggee vveerrssiioonn
        The IRC software version you are using: please include the
        output obtained by running ``irc -v'' for the client, and/or
        ``ircd -v'' for the server.

        Also, let us know if you have applied any patch to the package
        or if it is the vanilla version.

     OOSS Please, indicate which OS version you are running.

     CCoonnffiigguurraattiioonn
        If it is related to a configuration problem with the server,
        include the relevant parts of the configuration file.

     BBaacckkttrraaccee
        If the bug results in a crash, please include the backtrace.
        (This can be done, for example, by running ``gdb'' on the core
        file, and typing ``where'').

     FFiixx
        If you have a fix, don't forget to include it.


  66..22..  WWhheerree ttoo sseenndd aa bbuugg rreeppoorrtt

  Reports should be sent to ircd-bugs@irc.org.  Your report will be
  reviewed and forwarded to the appropriate mailing list.